8/11/2023 0 Comments Cherrymax rivet sizes![]() ![]() (3) Huck rivets Huck rivets consist of two parts a hollow sleeve made of 5056-H14 aluminum alloy having a universal or countersunk head with a conical recess and locking collar at the other end, and a pin made of 2024- T26 aluminum alloy which is pressed into the sleeve The pin is provided with an extruding angle and land to expand the sleeve for hole filling, a breakneck groove, and a head The pull grooves on the protruding end of the pin fit the jaws of the rivet tool. The NAS 13 are designed for thicker sheet needs. Fully serrated stem with break notch, shear-ring and integral grip adjustment cone Driving Anvil to ensure a visible mechanical lock with each fastener. This stem is designed to break flush to eliminate stem trimming after installation The NAS 17 are designed for use in thin and dimpled sheets, where a large head is needed. Cherrylock rivets NAS 13 and NAS 17, as shown in figure 2-56, differ from MS20600 and MS20601 rivets in that they have a mechanically locked stem. CherryMAX rivets are qualified to MIL-R007885C or rivet identification Refer to tables 2-10 and 2-11. Properly installed CherryMAX rivets may be used to replace both 2117- TT4 solid rivets size for size Shank and grip lengths of CherryMAX rivets are designed by dash numbers following the series number. The CherryMAX rivet can be used for all repair of Army aircraft involving the use and application of blind rivets The CherryMAX rivet should not be used to replace solid rivets unless absolutely necessary. (1) CherryMAX rivets These rivets, as shown in figure 2-55, are installed by one operator using a special gun which exerts a pulling force to form a head on the blind side of the rivet. Blind rivets are designed for difficult riveting in places where access is possible to only one side of the work CherryMAX, Huck, and Olympic rivets are explained in the following paragraphs. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |